The CM Little Mule Lineman's Strap Hoist with Hot-Stick Ring Hooks is a manually operated lever hoist designed for lifting, pulling, and tensioning applications in utility linework. It provides a 3/4-ton capacity with a 9.25-foot lift in single-line configuration or a 1-1/2-ton capacity with a 4.25-foot lift in double-line configuration. The hoist features forged steel hot-stick ring hooks with safety latches, allowing the hooks to be operated using compatible holding sticks. A double interlocking pawl system provides positive load control during operation.

The hoist features a cast aluminum frame, a 10-foot-long, 1-1/4-inch-wide green polyester web strap, and a 20-inch solid fiberglass operating handle with a replaceable overload-protection tip. A non-conductive winding wheel supports strap take-up, while the quick-disconnect sheave block allows conversion between single-line and double-line configurations. Weighing approximately 11.5 lbs, the hoist is manufactured in the USA in accordance with ASME B30.21 for manually operated lever hoists.

• 3/4-ton single-line capacity with 9.25 ft lift
• 1-1/2-ton double-line capacity with 4.25 ft lift
• Hot-stick ring hooks with safety latches
• Designed for lifting, pulling, and tensioning applications
• Double interlocking pawls for positive load control
• 10 ft green polyester web strap, 1-1/4 in. wide
• Solid fiberglass handle with overload-protection tip
• Non-conductive winding wheel for strap take-up
• Quick-disconnect sheave block for single- or double-line operation
• Cast aluminum frame
• 11.5 lb net weight
• Manufactured in the USA in accordance with ASME B30.21