The Crescent H.K. Porter 30" Bolt Cutter with Fiberglass Handles is designed for heavy-duty cutting applications across a range of material hardness levels. It cuts soft material up to 1/2 inch (13 mm) at 31 HRC, medium material up to 7/16 inch (11 mm) at 42 HRC, and hard material up to 3/8 inch (10 mm) at 48 HRC. Industrial-sized fiberglass handles provide strength and cutting leverage, while grips designed for multiple cutting positions support full-body leverage and one-handed cuts.

The bolt cutter features steel blades forged and machined in the USA with precision heat treatment for longer blade life. Optimized jaw pivot geometry is designed to reduce the force required to cut over the life of the tool, while an improved locking plate and nylon locking nuts help minimize bolt loosening and reduce the need for retightening. A screw adjustment allows jaw realignment as needed. The cutter is designed for applications involving cable and wire, but Crescent H.K. Porter specifies that it must never be used on energized circuits, wire, or cable.

• 30 in. overall length
• Cuts soft material up to 1/2 in. (13 mm) at 31 HRC
• Cuts medium material up to 7/16 in. (11 mm) at 42 HRC
• Cuts hard material up to 3/8 in. (10 mm) at 48 HRC
• Industrial-sized fiberglass handles provide strength and cutting leverage
• Grips support multiple cutting positions and one-handed cuts
• Steel blades forged and machined in the USA
• Precision heat-treated blades for longer blade life
• Optimized jaw pivot geometry helps reduce cutting force
• Improved locking plate and nylon locking nuts help minimize bolt loosening
• Screw adjustment allows jaw realignment
• Shear-cut jaw design
• Black oxide blade finish
• Full lifetime warranty
• Not for use on energized circuits, wire, or cable