For single phase pad mounted transformer bushing stud removable connectors for areas prone to flooding or tidal surge areas, these can be insulated to prevent an outage due to a Bayonet fuse failure, these should be insulated to prevent water contact from the insulated bushing portion to the cable insulation. These bushings have 1/4" drive removable bolts on the stud side for ease of transformer replacement needs, new shear bolts should need to be used when transformer is replaced.

*For 5/8" or 1" stud size with one or two cable tap from 4/0 AWG to 500 Kcmil copper or aluminum cables.

*For single phase Pad Mounted Transformers from 25, 37.5, 50, 75 y 100 KVA.

FEATURES:

• Material: Body: High tensile tin-plated aluminum alloy
• Bolts: High tensile strength aluminum alloy
• Voltage: Up to 480 V
• Tools: 3/4” HEX (six point) deep well impact socket required. 18V battery impact tool recommended.