The GenerLink Hybrid Transfer Switch – 40 Amp Surge Model is a meter-adjacent backup power solution designed to connect a portable generator directly to a home’s electrical system through the meter interface. Installed near the electric meter, this hybrid configuration provides an alternative for applications where standard meter-mounted installations are not approved, while still delivering generator power to the main breaker panel without requiring interior rewiring or a dedicated subpanel. The 40 amp configuration supports generator input through a 14-50 connection and distributes power across existing circuits based on generator capacity, enabling users to energize essential systems such as lighting, refrigeration, pumps, and security infrastructure during power outages.

Designed for residential backup power applications, the system enables safe and controlled power transfer during outages caused by storms, grid failures, or planned interruptions. Integrated 75 kA whole-home surge protection helps safeguard connected appliances and electrical systems from voltage spikes during generator operation, while built-in back feed prevention isolates generator power from utility lines for compliance and safety. The always-installed design allows immediate generator connection when needed, supporting flexible power distribution through the existing breaker panel without limiting users to predefined circuits.

Please note: Installation will need to be performed by a licensed electrician. 

Key Features - GenerLink Hybrid 40-Amp Non-Surge Model:

• Hybrid transfer switch design for meter-adjacent installation when utility approval is not available
• 40 Amp capacity compatible with portable generators up to approximately 9,600 watts continuous output
• Direct connection to main breaker panel without subpanel installation or interior rewiring
• Integrated 75 kA whole-home surge protection to protect appliances and electrical systems
• Powers hardwired circuits including lighting, pumps, refrigeration, and security systems
• Mechanical back feed prevention to isolate generator power from utility lines
• Enables flexible circuit selection through existing breaker panel during outages
• Compatible with residential electrical services up to 200 amp
• Always-installed configuration for immediate generator connection
• Designed for installation by utility personnel or licensed electrician

Recommended: GenerLink Hybrid 40 amp - use with portable generators running below 9,600 watts. Comes with 14-50AMP straight connector on a 20-foot GenerLok Power Cord and GenCap cover.

Have more questions click here and we will reach out soon!